Ferrari dino 246 gt

The Dino 246 was the first Ferrari model produced in high numbers. It is lauded by many for its intrinsic driving qualities and groundbreaking design. In 2004, Sports Car International placed the car at number six on its list of Top Sports Cars of the 1970s. Motor Trend Classic placed the 206/246 at number seven in their list of the 10 "Greatest Ferraris of all time".

Calls for more power were answered with the 2.4 L (2418 cc) Dino 246. The motor was a 65-degree, dual-overhead-camshaft, 9.0:1 compression ratio, iron block with alloy heads. The European motor produced 195 bhp (at 7,600 rpm), and was available as a fixed-top GT coupe or, after 1971, an open Spyder GTS. The American version had an exhaust air-pump, and timing changes which created 175 hp (130 kW). The GT had 3 Weber 40 DCNF/6 or 40 DCNF/7 carburetors. For the 246 a new version of the Dinoplex ignition was deployed, the more compact Magneti Marelli AEC103A system.

The 246 Dino GT weighed 2,380 lb (1,080 kg). The 246 Dino GTS weighed 2,426 lb (1,100 kg). The body was now made of steel to save cost. The 246 Dino had a 2.1-inch (53 mm) longer wheelbase than the 206, at 92.1 inches. The height of the 246 was the same as the 206 at 43.9 inches.

Dino 246 production numbered 2,295 GTs and 1,274 Spyders, the latter being built from 1972 to 1974 only, for a total production run of 3,569. Three series of the Dino were built, with differences in wheels, windshield wiper coverage, and engine ventilation. The Series I cars, 357 of which were built until the summer of 1970, used the same center-bolt wheels as did the 206. Series II cars (built until July 1971 in 507 examples) received five-bolt Cromodora alloys and "clap-hands" wipers. The Series III cars had minor differences to gearing and fuel supply, and were built at a much higher rate as sales in the United States commenced with this version. 1,431 Series III coupés and 1,274 GTS cars were built.

The 246 had a claimed top speed of 146 mph (235 km/h), although in July 1971 a road test by Britain's Motor magazine reported a top speed of 148 mph (238 km/h), which compared favourably with the 136 mph (219 km/h) achieved by a recently tested (though by now replaced) Porsche 911S. With a 0 – 50 mph (80/km/h) acceleration time of 5.5 seconds the Dino narrowly out performed the Porsche again, although the Porsche was narrowly the winner on fuel economy.The manufacturer's recommended UK retail price of £5,485 was higher than the £5,211 asked for the Porsche, although both cars were retailing for more than the equally brazen if in other respects very different Citroën SM, at £4,700.

The Dino's 2.4 L V6 found its way into a number of other Italian performance cars after its application in the 246, most notably the Lancia Stratos rally car.

When Ferrari Owners were asked to name the most beautiful Ferrari in history in a survey, funny enough they named the Dino 246 GT as the most beautiful. It's funny because actually the Dino wasn't a Ferrari really.
The history of the (Ferrari) Dino begins already in the 50ies, when Ferrari needed six cylinder engines for his formula 1 and 2 cars. The design of these engines was based on ideas of Alfredino who was Enzo’s son. He died with 24 years, but the engine was built and was highly successful. Years later the sports regulation demanded that formula 2 engines had to be produced in large numbers and Enzo Ferrari signed a cooperation with Fiat to produce first 2 liter and later 2.4 liter 6 cylinder engines that were used for the Fiat Dinos (Coupé and Convertible), the 206/246 GT/GTS and the Lancia Stratos as well.
Enzo Ferrari didn’t agree to use the Ferrari brand for cars built around engines with less than 12 cylinders, so the new car got its own brand “Dino” going back to Ferrari’s son. The brand was kept separate of Ferrari and even got its own distribution network. Years later the brand was given up with the 308 GT/4 as the last car, later 8 cylinder cars were given the name “Ferrari”.
The prototype of the Dino 206 GT was presented in 1965 at the car show in Paris. In November 1967 the Dino 206 Competitione was shown, now with the transvere mounted 2 liter engine. 1968 finally an almost production ready prototype was exhibited in Brussels. Production started in 1968 at Sciaglietti, final assembly was done in the Ferrari factory in Modena.
In 1970 the 246 GT replaced the 206 GT. It had a larger ironcast engine, many of the alluminium parts had been replaced by steer and the seats now were covered with vinyl. The car was a bit longer and was produced in three series (L, M and E). 1972 a sister car, the 246 GTS was announced showing a targa roof.
What all Dinos had in common was the special rear screen allowing for optimal visibility.
In general Dinos handle very well and almost like go-karts. They are easy to drive and compared to their larger sisters (i.e. Daytona or 365 GTC) quite compact and much closer to a race car.
The Dino 246 GT wasn’t cheap! Price levels were comparable with the Porsche 911S 2.4.